Anti-corrosion technique plan of the pipe’s inner wall
1．施工工艺 construction technology
喷砂除锈 检验 底漆 检验 面漆 检验 喷涂标志 出厂
Blast cleaning→inspection→primer→inspection→finishing coat→inspection→spraying mark→delivery
2. 喷砂除锈 blast cleaning
2.1管道内表面高压喷砂除锈达到AWWAC210-97规定要求，表面粗糙度达到40-70µm；
The pipe’s inner face should reach the AWWAC210-97 requirements after high pressure blast cleaning, and the roughness of surface should reach 40-70um.
